Fix WiFi Connection Issues in Windows
Wi-Fi connectivity issues often plague Windows users, resulting in an unconnected network or unstable signal. In this article, we will guide you to solve common Windows Wi-Fi connection problems and help you restore a stable network connection.
1. Check Hardware Connection
First, make sure your computer's wireless network adapter is turned on. Sometimes, the problem may originate from the hardware itself. Please follow the steps below to check:
Some laptops have a hardware switch for turning the Wi-Fi adapter on or off. Make sure this switch is turned on.
Make sure Airplane Mode is not enabled. If Airplane Mode is enabled, all wireless communication is disabled. You can check to see if Airplane Mode is enabled and turned off by looking at the network icon in the lower right corner of the taskbar.
2. Update The Network Adapter Driver
Outdated or corrupted network adapter drivers are a common cause of Wi-Fi connection problems. Make sure your network adapter driver is up to date. It is recommended to use Driver Sentry to automatically detect and update drivers, saving time and avoiding the risk of downloading or installing incorrect drivers.
Download the latest version of Driver Sentry, install it, and open the software. Click "Scan".
Once the scan is complete, it will display which drivers are missing or need updating. Find the network adapter driver in the list and click the "Upgrade" button.
After updating, restart your computer to ensure the updated driver works properly.
3. Reboot Your Device And Router
Sometimes, Wi-Fi issues can be caused by a temporary device failure. Restarting your computer and router is a quick fix for most network problems.
Shut down your computer and wait a few seconds before restarting. This clears the cache and temporary glitches.
Unplug the router, wait 30 seconds and then plug it back in. This helps to refresh the router's network connection and fix some glitches.
4. Run the Troubleshooting Tool
Press Win + I to open the Settings menu.
Go to "Update & Security", then click "Troubleshoot" on the left-hand menu.
In the "Troubleshoot" page, click "Additional Troubleshooters".
Find "Network Adapter" and click "Run the troubleshooter". Windows will scan for network issues and attempt to fix them.
After completing the process, check if your network connection is restored.
5. Check IP Configuration
An incorrectly configured IP address may prevent you from connecting to Wi-Fi, so you can try configuring the IP address manually or, more simply, resetting your network settings:
Press "Windows + R", type "cmd" and press Enter.
At the command prompt, type in the following command and press Enter:
'ipconfig /release'
'ipconfig /renew'
If the above steps do not solve the problem, you can try to reset your network settings. Open Settings, select "Network and Internet", and then click "Network Reset" under "Status".
6. Check Your Router Settings
Sometimes, Wi-Fi connection problems are not caused by the computer, but by the configuration of the router. Make sure the following settings are correct:
The router may be set on a channel that conflicts with other Wi-Fi networks around you. Using the router's management interface, try changing the channel settings to select a free channel.
Modern routers support both 2.4 GHz and 5 GHz bands. If your computer supports 5 GHz networks, make sure that the router is enabled for that band and that your computer can connect to it.
This is how to fix Wi-Fi connection issues in Windows, hope it helps you.
See also:
Guide to Fix Low Volume in Windows 10
